rate up to 750 cycles per hour, times number of cavities in a
Stainless steel tank, tank lid, mixer blades and feeder pipe.
Tank volume 6 gallons (22 liters).
Double blade planetary mixer with variable speed of rotation in
Pneumatic mold clamping system.
1.5 HP mixer motor.
Mechanism for gate cutting.
Computerized sequencer for automatic cycle control.
Max. molding air pressure up to 70 psi (5 kg/cm.sq.).
Molding temperature up to 300¡ÆF (150¡Æ.C), independently controlled
in the tank, in the feeder pipe and at the orifice with three
microprocessor temperature controllers with digital display.
Vacuum pump for deairing during mixing.
Average energy consumption 2 kW.
Power: 220 VAC, 50/60 Hz, single phase
Overall dimensions 40"L x 52"D x 80"H; (1016 x
1320 x 2032 mm).
Weight approximately 800 lbs. (365 kg).
Maximum size of molds 19" x 20" x 20"; (480 x 508
x 508 mm).
MIGL-37 has two modes of operation: single (manual) cycle operation
where you can use manual or semiautomatic molds and automatic
cycle operation for fully automatic molds.
Semiautomatic and automatic molds are mounted permanently to the
mold holder which moves up and down in cycles. In semiautomatic
mold an operator has to remove molded part manually.
of the machine is controlled with computerized sequencer having
16 outputs. They control solenoid valves and an operator can preset
and easily change timing of valve operation.
Machine has 22 liter cylindrical stainless steel tank and a double
blade planetary mixer with a scraper arm. The mixer is driven
with 1.5 HP variable speed motor.Tank cover with the motor is
lifted with rack and pinion mechanism.