Low Pressure injection Molding Equipments (http://www.pelcor.com)
Manual Low Pressure Molding Machine MIGL-28 for molding net shape ceramic, metal and wax parts for experimental or small production, using thermoplastic or thermosetting binders(U.S. Patent N 4,416,603)

Production rate up to 70 cycles per hour, depending on the complexity of a die

Stainless steel tank, tank lid, mixer blade and feeder pipe.

Two blade stirring mixer in the tank.

Pneumatic clamping cylinder.

1/8 HP mixer motor, 58 RPM.

Molding air pressure up to 70 psi (5 kg/cm.sq.)

Molding temperature up to 300F (150C),

independently controlled in the tank, in the feeder pipe and at the orifice with three microprocessor temperature controllers with digital display.
Machine is operated with two manual valves.
Tank volume 0.8 gallons (3 liters).
Average energy consumption 1 KW.  
Power: 110/120 VAC, 50/60 Hz, single ph.  
Overall dimensions 21"L x 24"D x 47"H (533 x 610 x 1194 mm).  
Weight approximately 150 lbs. (70 kg).
Maximum size of dies 12" x 8" x 16" (395 x 205 x 410 mm).